Mitsubishi WS-55511 55" Rear Projection Television "dm module repair" Questions

...DM" module is removed from the TV and ONLY the four 1000uF, 16V Capacitors (Caps) located on the DM Module are replaced. MOST techincians will INSIST on replacing the entire DM Module and not simply ...

...DM module and some capacitors in the power supply. If the DM module is not happy it does this blinking thing. I have repaired a few of these DM's myself which is cheaper than the whole module. Try to ...

...dm module ? how to replace? e mail [email protected] you can get the V23 DM repair kit which has the replacement capacitors and step by step instructions on doing the repair. The kit will ...

...DM module by a tv repair service who checked continuity in many of the components. What do I really need to fix it/ Can I order the parts myself? From whom? Can I install them? The service manual is ...

...dm module needs to be replaced. But because it's a part that is no longer available you must find a tv repair shop that will rebuilt it or already have a chassis available that has the dm module ...

...DM module repaired....requires replacing four 1000mf 16v 105 degree capacitors with a bit higher voltage = 25v or 35v.....if too tall, lay them over 90 degrees on to board.....there are many entries ...

...DM module repair is simplisticand incomplete, as you found out. ALL defective DM moduleshave bad SMC's ( small "top hat" caps) AKA surface-mountcapacitors that can be changed only by the most highly ...

...DM module" needs to be replaced. This is NOT a cheap repair and Mits KNOWS these sets are a problem. There is SOME possibility that the DM module, and possibly the formatter module too--could be ...

DM Module How can I remove the wires from the DM Module w/o removing the unit first? You have to take the top piece on the left side off w/4 screws. Then there are 2 things that is holding the DM unit

...DM Module loose. But itcan't be rotate out because of the upper plastic guide. STEP2) How the DM Module is rotated out of the TV case. Allow thewires entering the DM Module to be an axis point of the ...