installing new belt +++++++++++++++++++++++++++++++++++++++++ +>> Unplug the mains lead from electrical socket <<+ +++++++++++++++++++++++++++++++++++++++++ • Turn cleaner over in flat ...
...correctly and not stretched. The capstan is not turning at all. What to do? probably need a new motor and beater
Question about Bissell Vacuums
...OK..........I've got the cover off and see that it is my belt.........went to wally world and got a new one...............now i cant get the little red thing off to put new belt on!!! HELP!!! Ok ...
...bar itself, you'll see a drive belt pulley system and chances are, a broken belt. Replace it with a new one by pulling the beater bar assembly out of the housing and plcing the belt onto the motor ...
...the beater bar and remove the things that tend to wind up on the bar and at the ends. Slip your new belt over the motor shaft, and then slip the beater back under the belt. It will be tighter ...
...them and set the plate to the side. The beater bar rides in sockets. Remove the bar, install the new belt around the motor shaft, then work the beater back into the sockets. Replace the plate.
...what size you need. You can also take the old belt to the store and match it up with the available new belts. Once you have a new belt you need to remove the beater bar. The ends of the beater bar ...
...remove carefully, making note how it comes out. This will make reassembly much easier. Place your new belt on the motor shaft, then onto the beater bar while you replace the beater bar back into
...use the screwdriver to unhook it from the gear that is attached to the motor inside. 4. With the new belt, repeat the steps in reverse, hooking the new belt onto the motor gear, over the beater
Question about Vacuums
my beater bar will not engage new belt everything is hooked up right beater bar will not turn. when i turn vac over i can spin the beater bar wrong belt or some dont tighten untill you drop handle
61 questions posted
Usually answered in minutes!
2 Questions