Question about Brother Crafts & Hobbies
...thread & the bobbin thread are not set under the presser foot when starting to sew 6. the threads were not drawn to the rear after sewing 7. The thread is either to heavy or to fine for the ...
Question about Juki Crafts & Hobbies
Inserted bobbin case. Brought up bobbin thread but would not advance further. Bobbin case stuck. Removed throat plate, removed remaining thread from the bobbin. You should probably contact Juki ...
........ assuming it is the bobbin thread - Is it the genuine correct bobbin. Has the bobbin has been inserted into the case the correct way ie it is unwinding the correct direction. Has the bobbin ...
How do I Reinsert bobbin case in Janome 350E? Check you instruction manual. The Bobbin goes in under the pressor foot. You need to lift or pop out the clear cover. Unsure if it is clockwise or ...
...bobbin is loaded properly and insert it into the machine with at least 6 inches of thread tail. Make sure you have pulled at least 6 inches of thread tail through the needle. Holding the thread tail ...
Question about Tivax Crafts & Hobbies
sewing i.e denim use size 14-16, poplin/calico size 12, silk/chiffon size 10. Also check that your thread is good quality. Is it poor quality cotton that breaks easily when to pull it? Do you have the
bobbin area, as a bit of thread, lint or whatever down there can really bollox up a machine. 2. The needle is dull, incorrect for the application or not inserted properly. Change needles regularly, be
21 questions posted
Usually answered in minutes!
8 Questions
0 Questions