...Reset How do I reset the server, wipe it clean to install new OS create a wipe disc from the internet or just install OS, When new OS is installing, before it does it automatically formats the ...
Question about Dell PowerEdge Computers & Internet
...install OS.. You must check if your bios detect your hard disk. check also if you r hard disk is sata and if it is on master jumper. see also it the HDD sata is enable in your bios. if all of this is ...
Question about Dell PowerEdge Computers & Internet
...poweredge 2900 server xeon 1.6 ghz/ 8 gb/ scsi 72 gb in 6 HDD, 2 NIC cards, dvdrom, no OS Its a Network boot process ( Earlier Boot Rom ) Disable in BIOS setup or Ignore it, install OS and use
install the OS as usual. If you are lucky WS2008 will already have a compatible SCSI/RAID driver. Otherwise, you will need to press F6 and install the driver from the floppy. If this helps please vote
Question about Dell PowerEdge Computers & Internet
...install the OS but tells my on HDD is detected Then you need to get into the BIOS of the PERC RAID controller and inspect the state of the physical/logical volumes. Reboot the machine and watch for ...
Question about Dell PowerEdge Computers & Internet
...install/upgrade disc for your 2950. You can reach the correct page by going to support.dell.com and entering the service tag found on the front right corner of your server. Download the ISO and burn. ...
Question about Dell PowerEdge Computers & Internet
...OS and boot function has gone bad. I want to remove the drive and see if I can access the drive as a slave from another computer. How do I get the top of the casing removed so I can access where the ...
Question about Dell PowerEdge Computers & Internet
...OS, install drivers (if needed - these should come with the pci card(s), use the disk manager to initialise/first format the drives etc. All done. I have done this myself running a 2600, with 2X U320 ...
Question about Vision Computer Computers & Internet
...HDD's. They show up in the RAID setup, but not in CMOS, and thus I cannot load my OS. Just a tip: Your OS shouldn't be on RAID. RAID is for storage. If it is a software RAID you will need to load ...
Question about Dell PowerEdge Computers & Internet
...os is on scsi drive and wont boot if sata is installed. how do i force machine to skip sata drive I think first u disconnect ur all HDD to server. then u enable ur booting HDD or operating HDD...and ...
43 questions posted
Usually answered in minutes!
139 Questions
105 Questions
98 Questions
37 Questions
27 Questions