Hayward SAND FILTER, PRO SERIES "diffuser gasket" Questions

Ad

Question about Hayward Pool & Spa

1 Answer

...diffuser gasket, 1 housing gasket. turn off breaker, disconnect wires -noting whether it is 110 or 220 volts- , unscrew four bolts on back of pump housing (shaft side of motor), pull out motor with ...

Ad

...gasket seating groove or the diffuser that rides atop the gasket. Whether it is fixable or not will depend on what is cracked. The diffuser can be replaced...the groove can not. A new top-mount valve ...

Ad

...good and runs good but water runs out the waste line. If you already replaced the gasket and upon opeing the valve, it is still in the grooves, look for a crack in the valve body and/or

Question about Pentair Pool & Spa

1 Answer

GASKET THE DIFFUSER O-RING,LID O-RING AND THE SHAFT SEAL.. ITS A 1000.. ASK YOUR LOCAL POOL SUPPLY FOR A PAC-SEAL 1000 .. CLICK HERE TO SEE HOW 2 REMOVE YOUR PUMP .. PRIME THAT PUMP AFTER A REPAIR ...

Question about Hayward Pool & Spa

1 Answer

...the impeller by spinning it counter clockwise... make sure you dont go cheap on the seals... and make certain to replace all seals on pump (diffuser oring, housing gasket, shaft seals, and lid ...

Question about Waterco Pool & Spa

1 Answer

...diffuser. Be sure none of the old gasket is still there. Thoroughly clean all surfaces as well to ensure the new gasket is fully seating in the valve. If that does not cure the leak you will need a ...

Question about Hayward Pool & Spa

1 Answer

...diffuser) or it will be in a groove down in the body of the valve (and it will be black). Take the top assembly and/or gasket to a local pool store. They'll have the part(s) and may even install ...

Question about Hayward Pool & Spa

1 Answer

...diffuser) gasket is pinched or damaged. You can replace it for under $20 unless it is the SP0714 model. If it is a 714 then you have to purchase a new key assembly or a whole new valve. Usually runs ...

Question about Smith Pool & Spa

1 Answer

...diffuser and its gasket also come out.Disconnect the electrical supply.Remove the diffuser if still covering the impeller, (there may or may not be screws to remove).Remove impeller ring (if ...

...diffuser goes into? spx3000t is the gasket you want. Or most shops will have what they call a go kit with all the pump gaskets and the seal you need. This is a link to the manuel for your pump. If ...

Not finding what you are looking for?
Hayward SAND FILTER, PRO SERIES Logo

839 questions posted

Ask a Question

Usually answered in minutes!

Top Hayward Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Hayward Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...