Robinair Cool Tech 34700Z Recovery, Recycling, Recharging "oil injection" Questions

...oil injection then you may need to check oil injection CHECK VALVE or oil injection SOLENOID ( Both located under Hidg side panel mountin valve). NOTE: UV Dye is not a problem for oil injection! I ...

under vacuum down machine started pulling oil front injection bottle You need to Change ''Oil inject" solenoin from small manifold assy. Note:Green dot OR blue label denotes are oil injectoct solenoid

...not inject oil You need to Rebuild/Replace oil injector solenoid, Located on "Inlet manifold block". Check attach picture to find location of oil injection solenoid. Hope this will help you. ...

CANT PUMP NEW OIL IN First make sure that you are in a 28-30 inch vacuum. then if you are your oil inject solenoid is clogged up. when you take the covers off there is a small block with 5 solenoids ...

34788 will not inject oil You have to clean oil injector solenoid or replace the new one. To find oil injector solenoid (S3) in the manifold assy. see the attached picture marked with green arrow. ...

MY MACHINE WOULD NOT "INJECT OIL" INTO CUSTOMERS SYSTEM. OIL CANISTER IS 3/4 FULL WITH UNIVERSAL OIL/UV DYE. ALL PROCEDURES WERE FOLLOWED EXACTLY THE SAME AS ANY OTHER VEHICLE. FIRST TIME THIS HAS ...

347002k. wants to inject oil in charge mode? is it the check valve? You have to do Just following # Check oil drain solenoid for any debris or damage inside the solenoid flunger. Replace/rebuild as ...

have 34700z refrigerant pressure into oil injection bottle why? This is a normal function of the machin,so don't worry!

keeps telling me pressures too high to vaccuum, inject oil, leak test I can Recover,and fill please u tell me sokkia total station set 220k display error 205 Check wire and connection of vacuum ...

...oil injection button (old series machine) press 8787 on keypad. However you can try as following: To access the change Defaults menu press 5454 (If keypad has oil injection button old series machine ...