Kenmore 30 in. 42701 / 42702 / 42709 Electric Cooktop "surface burner light" Questions

...surface light stays on and the biggest burner flashes error F153 and does not work. Other burners work. Can this be fixed? Hi Tricia, I assume this is a GE unit? Check this link from Appliance Blog ...

...surface light on my mothers stove stays on and all burners are off and cold any ideas why Hi, Here is a tip that I wrote about why the hot surface indicator light will not go out... Oven Hot Surface ...

...Electric Cooktop, The surface ON LIGHT will not turn off / go off - even when the cooktop burners are in the off position. They may stay on until the burners cool off. To indicate a hot

...surface indicator light stays on even after the burner has cooled. Is there a short in the system and how is it repaired? Most likely the problem is in the heat control switch.Cannot be repaired you ...

...burner is on, rather that the glass is abcove 100 degrees and still not safe to put something on 2 hours is a bit long but it depends on how fst the surface can cool of you can test this by trying to ...

...surface not hot. Front left burner error code f113. All other burners work. I have the same problem. I had a repair man here and he said the main powder logic board ( WB23T10014) was the problem, it ...

...burner doesn't work The most common problem for gas surface burners is that they get gas but don't light. This is generally caused by dirt or grease splatters on the burner itself. Residential-grade ...

...surface light stays on on GE Profile Cooktop model JP989 and On does not light for left burners. This is only happening on left burners. Left front burner goes to high with any setting on the switch ...

surface burner (12,500 btu). I used to be able to just turn the switch on high and the burner would light. Now, there is spark and clicking noise but it won't light unless I turn the switch right down