Razor MX500 Dirt Rocket "back wheel" Questions

Ad

Question about Cycling

1 Answer

wheel back into place and before tightening it pull down the spring loaded arm, with the small cog wheel beside the back wheel. This takes the tension off the chain and allows you to put it into place

Ad

...wheel back on my mongoose bike I just changed the tube on my bike tire how do I get the rear wheel back on? raise the back of the bike and put the wheel between the rear stays place the chain on the ...

Ad

...back wheel or sprocket? has the bike been in an accident recently? you can flip it over and spin the back wheel to make sure that wheel is "on center". if the wheel is not bent then u can just ...

Question about Cycling

1 Answer

...back wheel slipped. the back wheel is now pressed forward and touching off the metal in front so it is hard to wheel/move it. the nearest bike shop is very far away i dont know how i am going to get ...

...back wheel not spin easily? i bought a new bike off the internet and the back wheel is not spinning easily. it appears that the coaster brake or connections to the back frame are too tight. it is ...

Question about Specialized Bicycle Components Cycling

1 Answer

...back wheel is not aligned properly with the chain. As the wheel turns the chain is being pulled to one side causing it to slip to the next set of cogs. To solve the problem first you need to loosen ...

Question about Mongoose Cycling

1 Answer

...back wheel and mount the wheel to the bike. The chain will hang slack. Now mount the upper guide wheel and guide plate to the deraileur making sure that the chain feeds off the rear cog and passes ...

...back wheels so that don't rub on brakes? I have a Manitou bicycle. I tightened the wheel using the left and right hand tighteners. I still end us rubbing the brakes. if the wheel is centered the ...

back wheel. Then hold it on the top of the front cog wheel (at the pedals) Get someone to lift the back of the bike so the wheel is off the ground. While the wheel is off the ground and you're holding

back wheel and pull it back until the chain is tight and then retighten the nut. If when the chain is tight, the wheel is not on the rear frame, you need to take a link out of the chain. 1. Clean your

Not finding what you are looking for?
Razor MX500 Dirt Rocket Logo

151 questions posted

Ask a Question

Usually answered in minutes!

Top Razor Cycling Experts

ADMIN Eric
ADMIN Eric

Level 3 Expert

39391 Answers

vince

Level 3 Expert

2530 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66975 Answers

Are you a Razor Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...