Rheem 80 GAL ELEC TALL Water Heater 6YR SC 82V802 "air running cold" Questions

...run hose out door or window, then open value. need to open bathtube faucet.(cold) let it run until air gone, then go around and open all cold and hot faucets one at a time to remove all air in

...air running through the heater. My main question is if air gets into the heater,would it cause the heater to try to heat the air and cause the fan to speed up? I know that depending on what part of ...

air being drawn into the furnace burners may be blowing the pilot out. Last but not least is the condensation issue. When cold water enters the tank it can cause water to condensate on the outside and

...cold air for the entire apartment. However, 2 years later, I am finding that the air that comes out of the vents isn't really that cold and there isn't a whole lot of cold air coming out of the vents ...

...cold pipe from hot water pipe. I was told my Rheem AC has an energy feture that release the hot air into the water heater, could it be my AC overheating the water heater?? That is normal, the heat ...

...air since you're running through ductwork? How much hot air or hot water is coming off heat exchanger? How big of a space can be heated with that amount of heat? Is the exchanger located in optimal ...

...cold air was able to make it down into the combustion chamber and cause the tubing surrounding and thru the heat exchanger to develop ice blocks. I was able to use a hair dryer to thaw the tubing out ...

...air compressor and hook the air line to an open hot tap and put pressure and run the water out another hot tap. Close all taps but these two and make sure the cold water inlet to the tank is shut

...cold side {blue on the heater} the hot side to the red, take the cover plate off on the water heater run the wires, hook up the groung wire then the red and white wires to the wires comming off the ...

...to KW rating of unit install seperate circuit in fuse panel run appropriate size wire to location connect cold in and hot out water lines connect power, run water to bleed air. turn on breaker