My problem started like this,I found No spark so changed coil,cdi,voltage reg,eventualy found stator at fault,check pick up strip on flywheel and pick up pin on black pick up coil,this is fixed to stator and sends spark signal to cdi,mine were both rusty/dirty,I fitted a new stator,but now have light problems..stator seems to be to strong.
SOURCE: i have a cpi oliver
I possibly have the same problem. I have narrowed it down to a fuel (lack of) problem. If you remove the seat and take off the vacum tube leading to the fuel tank cut off valve ( on the bottom of the fuel tank) you will be able to squirt a little fuel directly into the intake manifold,replace the tube and hopefully it will start instantly.no dought it will then stop repeat the process several times.
I suspect there is an electric soleniod system to deliver fuel on startup, I have dismantled the carb and am fairly sure the problem is with the electric needle system on the rear of the carb.
Hope it helps
1,245 views
Usually answered in minutes!
×