1997 kawasaki ZZR 1100 Logo

Related Topics:

Posted on Sep 03, 2010

Bike has been layed up for a while. misfires below 3000 rpm runs fine above this. have changed plugs, changed fuel, cleaned carbs and air filter.

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Sep 05, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Sep 05, 2010
Answers
1
Questions
0
Helped
337
Points
2

Hi there,
If u have left the bike standing

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My x475 jd backfired through carb, fuel lines are

that sounds like a lean misfire... suspect that your fuel mixtures are off... engine numbers would help here
Sep 09, 2014 • Motorcycles
0helpful
1answer

Fuel and oil lights flicker at 3000 rpm and up

Check wiring to console, especially the ground.
0helpful
1answer

This is my occuring problem I've been having: Bike starts up fine and will run fine in any gear if going slow and not opening the throttle lots. But as soon as open throttle lots the bike instantly...

this does is not related to the idle adjustment. It sounds strange that there is no fuel filter, there should be. the screen is for only stopping any large debri from going to the carbs. follow the fuel line from the tank valve and I will bet you will find a fuel filter. i also would suggest draining the fuel bowls on the carbs and catch the fuel. check for any debri in this gas. You may try running some seafoam carb cleaner thru the carbs. After changing filter and bowl draining does not work you may have to remove the carbs to clean them and make sure all is operating correctly ( slides). be sure that your air filter is also clean.
1helpful
1answer

Wont idle ,motor tapping below 1300 rpm,changed plugs,coils,clears out at 3000 rpm sluggish though,checked carbs but all looked normal and clean.our area is going to 10 percent ethonal had problems with...

Carbs need to be removed, dismantled and cleaned. Soak in solvent or equivelant for a couple hours and use air nozzle to blow dry. Make sure to blow out jets.
1helpful
1answer

Bike will start &idle & rev but when ridden misfires &won,t rev above 3000

its either fuel or air, check the air box under the seat, clean the filter, then check the fuel filter. If this doesnt work I would say you have dirt in your carb main jet.
Not finding what you are looking for?

347 views

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...