I can't find the battery where is it placed? - 2005 Aprilia Scarabeo 200

1) Buy a new battery that is compatible with the TB30. Open the battery cover and remove the bolt on the left side.
2) Remove the red color plug and unscrew the bolt under it. Remove the strings and open the latch above the battery.
3) Pull out the battery and dispose it off for recycling (as per the guidelines in your region) Remove the battery holders under the battery and clean them completely.
4 ) Place the holders back in position and place the new battery over them.
5) Place the latch back into its original position and lock the battery.
6) Screw both the bolts back into their original state and place the red plug over it.
7) Cover the battery region and complete the process.

On some vehicles theres a tray that the battery sits on. These trays can be removed or the battery tie down bar can also be removed to fit the battery in place. If you are not able to place the tie down back in place you can use a bundgy cord to hold the battery in place. First you hook the cord into the vehicle before you place the in, make sure the hook part is not going to touch the battery bcaz it might puncture the battrry or wear a hole in the battery. So then u should make sure the strap or cord is not too lose and attach the other side so it will be safely secured in your vehicle. Preferably rubber, so if this helped you please give me credit for answering your question.

1. • 1 Flip your mouse over and remove the battery cover. Gently pull it up and set it down in a safe place.
     
   • 2 Carefully remove each battery.
     
   • 3 Insert the new AA batteries into the mouse. Make sure the positive and negative connectors are lined up correctly. Do not force or jam your batteries into place.
     
   • 4 Place the battery cover over the opening and click it into place. Flip your mouse over. If your particular mouse has a charged or not-charged display light, make sure it is showing full strength.
     

Hello sandy you are looking batteries at cheap prices there many places and store that sell okaya battery but i suggest you the place where you buy okaya inverter battery. Visit on batterybhai.com a largest place of okaya brand and its prices are best instead other.

1. • 1 Flip your wireless mouse over and remove the battery cover. Gently pull it up and set it down in a safe place.
     
   • 2 Carefully remove each battery.
     
   • 3 Insert the new AA batteries into the mouse. Make sure the positive and negative connectors are lined up correctly. Do not force or jam your batteries into place.
     
   • 4 Place the battery cover over the opening and click it into place. Flip your mouse over. If your particular mouse has a charged or not-charged display light, make sure it is showing full strength.
     

The OneTouch Ultra uses a three-volt lithium battery. When this battery requires replacement, you'll see a flashing message on the display screen. Changing the battery should take you less than five minutes.

1

Turn the OneTouch Ultra off, and then turn the unit over to view the back.

• 2 Push the plastic tab on the battery cover upward. This unhooks it from the unit. Pull it off to view the battery.
  
• 3 Lift the battery out of the OneTouch Ultra. Set the new battery in its place. Make sure the "Plus" sign faces upward.
  
• 4 Place the battery cover back in place and push it to snap it back on.
  

Place the DeVille in "Park" and allow the vehicle components to cool for a half hour.

Locate the battery under the hood of the DeVille. The battery tray is located on the driver side of the Cadillac. Locate the strap securing the battery to the battery tray and unbuckle the strap.

Disconnect the negative cable using a combination wrench. The negative cable is the black cable. Place the cable to the side. Disconnect the positive cable next, which is the red cable, and place it to the side. The battery can now be removed. Lift the battery off of the battery tray, carefully. Dispose of the battery per local regulations.

Use a wire brush and clean rag to clear away debris and dirt on the battery tray to ensure a clean connection.

Install the replacement battery by placing it on the battery tray. Buckle the battery tray harness around the battery. Reconnect the red cable, followed by the black cable, using the combination wrench. Close the hood of the DeVille.

Yes you can send the camera to HP. Call them at 800-HP-DIRECT to get the mailing info. Joe

The latch is required to hold the batteries firmly in place. Also, on the battery latch, you have a piece of metal which connects the positive side of one battery to the negative side of the other battery. So if you can place a piece of metal or use a wire to connect the two batteries, and then hold the batteries in place somehow, your camera will work.

If you remove the battery from your bike DO NOT store it on a concrete or metal surface, place the battery on a wood or other non-conductive surface. Batteries stored on concrete or metal will discharge over time.