There are 2 types of cable used. Auto Adjust...and Manual Adjust.
Either are easy to fit. Remove tray over foot=pedals will allow you to
access one end of the cable. Here the cable simply hooks over the pedal
linkage. Remove the outside plastic panel in front of windscreen to
allow the cable to be installed. If the cable is the Manual Adjust
type, loosen off the adjuster nuts at the clutch lever on the front /
side of the gearbox and pull out cable.
If car is fitted with Auto Adjust cable...A Plastic Retainer Strap will
be installed on the cable at the gearbox end. This retainer should be
latched into place before removal. If the cable is broken at present
you need not bother with this retainer. A new cable comes with this
retainer already fitted. Its simply a matter of fitting the cable in
place at both ends and then releasing this retainer. Do NOT release
this until the cable is fully installed at BOTH ends
John
Testimonial: "thnx"
898 views
Usually answered in minutes!
×