My owners manual says remanufactured. what does that mean

Some products behave unpredictably when using off-brand toner cartridges or refilled/remanufactured ones. You may want to try using a fresh Samsung catridge too.

The only rest I'm seeing in the owner's manual is to unplug your printer at the wall. Most devices need just about a minute of time uplugged to reset. I normally would also press the power button while it's unplugged too.

I found a link for you to the ower's manual. I hope it helps you in the future. The owners manual can be downloaded here: http://downloadcenter.samsung.com/content/UM/201312/20131227145527765/EN/english.pdf

Here is a link to the Life Fitness support page. You should be able to locate your manual there:

http://www.manualslib.com/brand/life-fitness/exercise-bike.html

Key Dn, means you have a stuck key on your keypad. See page 55 of the service manual.

http://www.sportsmith.net/images/product_support%5Cstartrac%5CTechnical%20Manuals%5CTreadmills%5CSvcMan%20TR4500.pdf

you must RUN the software calibration go under the HOOD motor and follow the instruction. or read your owner manual for instruction and fix it.You will get easy diagnostic and fix it.

God bless you

Verify floats are properly moving freely by removing gas tank and looking down on carburetor housing. Open gas throttle gently through visual inspection. Check throttle grease for smooth play and fluid movement. Verify fuel to oil mixture. Check idler adjustment, refer to owners manual and schematics. Possible carburetor remanufacturing, replacement, or kit overhaul.

This means you have a stuck key on your keypad. The solution most of the time is to replace the keypad. You can view this information starting on page 55 of the service manual.

http://www.sportsmith.net/images/product_support%5Cstartrac%5CTechnical%20Manuals%5CTreadmills%5CSvcMan%20TR4500.pdf

This means the elevation has stalled. Please see the EL STL Flow Chart in the service manual starting on page 68.

http://www.sportsmith.net/images/product_support%5Cstartrac%5CTechnical%20Manuals%5CTreadmills%5CSvcMan%20TR4500.pdf

home depot will have the owners manual at the pro desk they carry that exact product

I send the next week a copy of manual send me the exact model and serial number if possible a picture of the machine my E-mail [email protected]

Owner Manuals . try this link to cybex support