I have a 94' honda 600 cbr and it keeps stalling when i try to put it in gear, y?

SOURCE: stall when in gear

The kick-stand switch or clutch lever switch have failed.

SOURCE: lost cbr 600 f4 key?

http://www.carlsalter.com/motorcycle-manuals.asp

get a free pdf service manual for your bike here. you should find out how to remove the ignition. or if you have a seat lock that is easier to remove take that to a locksmiths to get new key cut

SOURCE: 2008 HONDA cbr 125 Popping out of 5th Gear

Only three things would cause the problem. 1) a slightly beny shift fork, 2) a shift index wheel loose, 3) the foot shift lever needs to be adjusted.

The most likely source is the shift lever needing to be lower. Once you are in 5th gear you move your foot to the top iof the pedal in preparation for a downshift. At high speed your entire body is leaning forward FOOT INCLUDED. Chances are that enough pressure is on the pedal to move the slider gear out of position and thus out of 5th gear.

I hope I am right in the solution. Best wishes.

SOURCE: honda keeps stalling

You probably know this but... when you put it into gear you don't have your kickstand down do you. There is an automatic shutoff on the kickstand.

SOURCE: FI light comes on. Honda CBR 600

FL stands for Fuel Injecton. Your fuel injection sensors have found a problem and the onboard computer chip is telling you. You must have a dealer read the computer code to find out what the problem is.