20 Most Recent 1988 kawasaki ZX 400 Questions & Answers

Ask a tech at dealrship or library sec629

hi there,, havent tried these guyz yet meself,, but its a downloadable site or sell yuh a manuel,, but try em ,,its www.repairmanual.com hope it helps,,

Hi and welcome to the site,

For the wiring diagram of a Kawasaki GPZ / ZX 400, please click here.

Good luck and thank you for asking.

facebook kawasaki zx400g zx4-f3 :)

facebook zx400g zx4-f3

facebook kawasaki zx400g

facebook zx400g

facebook kawasaki zx400g zx4-f3

facebook zx400g zx4-f3

your serial/model number on the bike should end with witch ever model it is  zx400L or end  with zx400H  this should be stamped on the frame  

facebook.com/zx400g

yes it is :)https://www.facebook.com/zx400g

hiya

go to here just register and download your manual

http://kawasakiownersclub.com/topic/551456/1/

hope this helps


John

All four....if you want it to run on all four cylinders.

check the wire first , then the route leading back ,, ( coil, and other ignition parts )

You can go to tradebits.com or payloadz.com to purchase a manual that is an instant download.

buddy squirt fuel in air box and see if it fires for a second

Here is a website that will give you the history on your Kawasaki for free.

http://www.motoverse.com/tools/vin/kawasaki.asp

Hope this helps.

May I suggest a trip to your local library. Cycle repair books should be in 646 stacks of reference.

You are really stuck with the OEM or aftermarket. The main reason is the spacing between each carb based on the brackets holding the carbs together and the choke. Also even if you go to a flat slide carb there will be a great deal of tuning required. Hope this helps.

JP