I have bought a replacement tranmitter for 2001 Suzuki Ignis Remote Central Locking System. I have an original that works but cannot Program the new one as per Owner's Manual given to me when the car was bought new. The procedure given does not work. Has the procedure been updated or do I have to take it to a dealer?

New remotes are available after market and they have instructions on how to program

both remotes do not work, check for blown fuses, possible you have a bad body computer/security system.

my suzuki alto 2009 locks keeplocking on and off all the time can you help with problem

hi, I have the same problem. The central remote locking is controlled by the soriginal stereo. Thats why it has an extra section of wires than other stereos. I cut this section off and connect it back to the original stereo and the remote lock works again. but as long as you connect the rest of the wires to the new stereo, the lock lost again. Now is like nly music or the lock. I have not find a way to let both of them work. Please let me know if you do.

I'm having the same problem have you fixed yours?

hi this is how you do it
first off make sure the alarm system is off then put the key to be programed into the ignition turn ignition on then off within 5 seconds this is then in program mode press the lock or unlock button 3 times within 20 seconds and then the central locking should start working indicating the remote is now programed...hope this helps please vote thanks

Programming
When
Remote control buttons operated repeatedly while vehicle out of range and system becomes inoperative. System malfunction.
How
Ensure ignition switched OFF and all doors closed. Proceed as follows: Within 10 seconds, open driver's door and switch ignition ON. Within 10 seconds of switching ignition ON, switch ignition OFF. Within 20 seconds of switching ignition OFF, press and release driver's door contact switch 3 times. Within 10 seconds of releasing driver's door contact switch, switch ignition ON then OFF. Within 20 seconds of switching ignition OFF, press and hold both remote control buttons in turn for at least 5 seconds. The driver's door should lock and unlock once. Within 5 seconds of driver's door locking/unlocking, press remote control lock button Fig. 1 [1] or unlock button [2]. Programming procedure complete. Confirm programming has been successful by locking and unlocking vehicle.
NOTE: A maximum of 2 remote controls can be programmed.

Should have a key fob.  You can buy a used one and the dealer can program it.  You can not program it yourself.

suzuki swift central locking does not operate when using remote key fob