Iam trying to put the Serpentine belt on a 2002 Chevy Tracker,Iam on my third belt and I dont have a diagram, what can I do? After I put the belt in place there is too much slack in it.And when I start it up the belt just slips on the pullys.Iam not sure if Iam getting the placement correct. I cant find a Diagram anywhere.

Jerald, You will have to remove the the accessory belt first I believe by putting appropriate wrench on tensioner and pulling tensioner toward passenger side to allow removal of the belt. Then you will loosen alternator to let tension off fan belt and replace the fan belt. Reverse procedure to install. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
2002 Chevy Tracker 2 0L 2 5L Serpentine Belt Diagram serpentinebelthq com
https://answers.yahoo.com/question/index?qid=20060822210207AA9Tfgo
chevy how belt tensioner works Google Search

How-To Replace The Serpentine Belt On A Chevy Tracker ...

? 1:22
www.youtube.com/watch?v=sXLTZzEZdSU
Oct 28, 2014 - Uploaded by Deo Ole
How-To Replace The Serpentine Belt On A Chevy Tracker ...2001 Chevy Tracker V6 2.5L Head Instal and Timing Chain Instal - Duration: ... XL 7 2.7L Air conditioning compressor removal and smaller belt installed - Duration:

If you mean the serpentine belt, this ought to be the answer.

02 Chevrolet Tracker Serpentine Belt Replacement 2002 Chevrolet Tracker...

The ventures serpentine belt can be removed and replaced by releasing pressure on the tensioner. Just take your large socket wrench and insert the square head into the square slot on the tensioner and use it to release tension on the belt.
-------------- For more detailed procedure with diagram and full procedure , click the link below :--- http://howtobyme.blogspot.com/2011/08/how-to-replace-serpentine-belt-on-2001.html --------------
This will help.thanks.Helpmech.

Hope this helps, this one is for the 2.0L, V-belt and serpentine. This one is for the 2.5L engine,

For the 2000 Chevrolet Tracker:

Most modern vehicles have the Belt Routing Diagrams on the undeside of the Hood. But the sometimes disappear.

I do not know if you have the 1.6L In-Line 4-Cylinder, or the 2.0L DOHC In-Line 4-Cylinder. Nor what Engine Options you have (AC/No AC, etc.).

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2000/make/chevrolet/model/tracker/2000_chevrolet_tracker_drive_belt_routing_diagram.htm

DRIVE BELT DECAL SHOULD BE UNDER THE HOOD.OR YOU CAN GO TO DEALERSHIP GET ONE AUTO ZONE OR ADVANCE AUTO PARTS CAN GET YOU ONE.OR YOU CAN BUY A HAYNES REPAIR MANUAL IT HAS BELT DIAGRAM.

diagram should be on the radiator shroud / top of radiator

First, keep this diagram around as you will need it to route the serpentine belt when you reinstall it. There may also be a diagram under the hood by the radiator.
Next, follow this link and watch the video that shows you how to replace a serpentine belt...
http://www.wonderhowto.com/how-to/video/how-to-inspect-and-replace-your-car-s-serpentine-belt-267229/

With AC, I hope.