SOURCE: where is the oxygen sensor located on the hyundai
follow the exhaust pipe from the motor. i beleive it is before the catylitic converter. screws into the side of the pipe and there are wires attached to it.
Robert
SOURCE: need to replace lower front ball joints on a 99
The ones from the dealer is a ball joint and the control arm which come together with the ball joint already press in one whole piece meaning less work to do. just a simple swap in swap out. The $40 from parts stores or parts source is just a ball joint itself which still needs to be press in which is more labor work.
SOURCE: My Hyundai Santro Xing GLS A/C gets cutt-off when
No telling what the problem is.... take it in & have it diagnosed.
SOURCE: is a ball bearing the same as a wheel bearing hub
????? This vehicle should be equiped with tapered roller bearings. Ball bearinga are out dated and not used since the 60's. No on the hub assembly, The brgs go into the hub and are replaceable as a seperate part.. $ 500.00? This is a mechanic? Do this, jack up the front end of the vehicle and rotate the wheel to determine if there is a proble. Not ant rough or hanging up of ythe wheel while turning it. Then put one hannd on the top and one on the bottom and push and pull. You are now checking for loose bbearings. Any looseness or roughness is a call to have the wheel and hubs pulled and inspected. 500.00? He is trying to get rid of you by quoting an outrages price. If you accept the estimate he is all the more happier for ripping you off. Take it to another shop and say no more than " Please chk the front end and wheel brgs. DSay no more than that and leaave them to their work. They will call you when they need you. Ask for the old parts if you have them replace or repair.. My estimate. 20 to 30.00 in parts and shop time 1.5 hrs. A reputable shop will show you where,why,and how.the process works..
SOURCE: How to replace ball joints on 2002 Chevy Suburban
The ball joints are press in type a good diyourselfer could do this job fairly easily. You should be able to rent the press at your local parts store
171 views
Usually answered in minutes!
×