At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Your switch is probably loose or malfuntioning. It is activated when the brake lever moves away from it and may have shifted away from its original position.
haven't checked it out yet. I'll let you know. Most likely look at it this weekend.haven't checked it out yet. I'll let you know. Most likely look at it this weekend.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
As long as there are no problems detected in the parking brake system, the parking brake light will stay on until the parking brake is completely released.
Emergency brake may not be all the way off .Also thelow leval brake fluid sensor might need attention....check the fluid in the master cylinder and if thats good ,unplug the sensor at the brake fluid resivor and see if light goes out
The emergency brake cable could have stuck on enough to make the light stay on. Sometimes a little lubricant on the cables might help. Try setting and releasing the emergency brake a couple of times. I have even had to get under the car and tap the brake cable to release it fully.
2007 PONTIAC G6 CONVERT. BRAKE LIGHTS STAY ON WHILE DRIVING AND GO OFF WHEN PUT BRAKES ON, AND YOU CRUISE CONTROL WILL NOT WORK WHILE BRAKE LIGHTS ARE ON.
there is a small switch above the brake pedal with a black wire going to it, they stick or the little bracket they set in gets bent, this allows the switch to stay on and in turn the light for the E-Brake stays on, press on the switch and push the little spring loaded plunger in, that light should go out, also make sure the brake pedal is all the way up, if it doesn't want to fully return adjust the park brake cable.
×