At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Disconnect the wiring harness from the Crankshaft Position (CKP) sensor.
Remove the fastening bolt for the CKP sensor.
Remove the CKP sensor and the O-ring seal from the engine block.
To install:
Thoroughly clean the mating surfaces of the CKP sensor and the engine bock.
Install the CKP sensor with a new O-ring seal, into the engine block.
Install he fastening bolt for the CKP sensor
Attach the wiring harness to the CKP sensor. Be sure to route the cable correctly
Fig. 1: The location of the Crankshaft Position Sensor (CKP) - 3.0L engine
Fig. 2: Location of the CKP sensor connector - 3.0L engine
The 'pickup coil' is a general term for a sensor that picks up movement or speed or pulses from a reluctor wheel. It is also used for the Camshaft Position Sensor.The 'pickup coil' is a general term for a sensor that picks up movement or speed or pulses from a reluctor wheel. It is also used for the Camshaft Position Sensor.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Question edited for clarity.
Question moved to Brougham category.
The 'let's try replacing this' method of car repair seldom works and is expensive. Your vehicle has an OBD port and although limited due to age and technology, there should be enough information that a professional scan tool computer can diagnose the issue.
i have a 1995 fleetwood brougham and when you open the doors inside lights dont work neather does any of the in side light work with doors closed even the ones on the mirror
1993 BROUGHAM & 1993-96 FLEETWOOD Oil Life Indicator 1. Oil life indicator will display CHANGE OIL when oil change is needed, based upon engine oil temperatures and driving patterns. After changing oil, reset oil life indicator. 2. To reset, turn ignition switch to ON position. Do not start engine. Fully press and release accelerator pedal 3 times within 5 seconds. If CHANGE OIL light comes on and stays on for 5 seconds, it did not reset. Reset system again.
For the 1989 Cadillac Fleetwood: I do not know if you have the Fleetwood Brougham with the 5.0L V8, or the Fleetwood FWD (Front Wheel Drive) with the 4.5L V8; however I have included both below.
×