At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
12 is telling you the battery has been disconnected recently, or gone dead, and 55 is end of message. In other words, you have no trouble codes to be concerned about.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
According to my source, code 1899 is a problem with the governor pressure sensor. But 4 digit codes are model specific, so you may be right about the selector switch. If the switch tests out to be faulty, it would need to be replaced and the code erased.
You may have drawn air into the hydraulic line. Check the fulid level in the clutch reservoir. If it's low, look for a leak (usually it's the slave cylinder at the transmission that starts leaking. Please get back to me after your visual inspection for further advice.
if it is a trouble code for the downstream oygen sensor, or cataylist below threshold, it pertains to the catalyitic converter. I would check that if i understand you correctly.
P0302 is miss fire #2 cyl like a bad plug,wire or coil P1684 will set if you have lost battery power or battery has been disconnected the miss fire is why the car is jerking
If your check engine light is coming on, then there should be a trouble code stored in your computer to tell you what area to look in for problem. Run into an autozone, or Pep Boys & get a free scan and see what they say comes up for codes & then if not obvious what the problem is, get back to us & we'll help you out.
My Neon was doing the same thing. After hours of trouble shooting it turned out to be my positive battery terminal. It looked good but after replacing I have not had any problems.
×