20 Most Recent 1999 Plymouth Neon Questions & Answers


Read this and re-post your question with more helpful information. This one doesn't cut it.
Car won start Ricks Free Auto Repair Advice

1999 Plymouth... | Answered on Mar 01, 2018


No Engine I know of has a 1,2,3,4, fitting I am sure you have the firing order connected wrong, plus your description point to the firing order as well. Cheers, Malcolm Campbell.

1999 Plymouth... | Answered on Apr 18, 2017


Just google Dodge Neon images or Chrysler Neon images and you can find some engine bay pictures. If you click on individual pictures there is a link to the source page where you will likely find even more pictures.

You can also google parts diagrams that will show a drawing of various components of the intake system. The major parts suppliers often have these exploded diagrams on their web sites so you can check item by item. This is probably the best option.

There are also numerous videos on Youtube of people working in Neon engine bays.

1999 Plymouth... | Answered on Dec 17, 2015


u dont as tneubauer and emissionwis state dangerous to be fooling around with airbag system if light on have vehicle scanned some auto store such as auto zone / advanced auto scan for free the code can give u a place to start -but unless ur a tech who has dealt with air bags dont mess around with connections or even dash -bring to auto tech or dealer for repairs-- with light on driving can be hazardous because bag or bags can deploy

1999 Plymouth... | Answered on Dec 03, 2015


Check for vacuum leaks.

1999 Plymouth... | Answered on Sep 27, 2015


Hi Earl:
Since the valve cover is not subject to mechanical loads like connecting rods or main bearing caps, tightening to an exact torque is not usually an issue.
The important thing is to have the parts clean prior to assembling.
Make sure the gasket is properly fitted, and apply sealer as recommended. I would just run all the bolts in until light contact is made, then starting at the centre, gently snug them down. If you pretend you're following an increasing spiral (same idea as head bolts) and repeat several times, you'll find that a "point of resistance" is reached that indicates they are done. It comes with years of experience, and breaking one bolt because you overdid it.

1999 Plymouth... | Answered on Jun 14, 2015


Sounds like you answered your own question, if the battery was dead there is a good chance that is the reason it wouldn't start. Now you need to figure out if your battery is bad or if your alternator is not charging the battery. Have the battery charged and tested. If it tests good, put it back in the car and see if it starts. If it does, check and see if the alternator is charging the battery with the car running......you should have between 12.5 and 14 volts at the battery with the car running. If you do not have this I would change your alternator.

1999 Plymouth... | Answered on Jun 11, 2015


check fuel filter, fuel pump relay, or fuel pump. IF the car don't even crank over, (starter don't work) then:


READ THIS ALL BEFORE YOU DO ANYTHING
NOTE: some vehicles have the starter relay and starter mounted together as 1 unit. Sometimes the starter relay and starter are seperate. When I refer to "relay" it could also mean the starter and relay as 1 unit.
Note: "starter switch" is not to be confused with "key switch", although sometimes they are all one unit. The starter switch is usually mounted on the steering column and actuated by a metal rod. On units that are all one unit, the keyswitch/starter switch (both one unit) will have to be replaced. (this is a rare problem, so don't get worried just yet)
1. Check battery voltage, should be between 12.5-14.5 volts. if low voltage replace or charge battery, and try to start car, if it don't crank with new or charged battery, move on.
2. Check connections on the starter relay, even the small one coming from your starter switch. if loose or corroded, clean with a brush and reconnect them. Try to start your car. Did it start? if not, Move on
3. Well now we know the connections aren't the problem. How about a click? did you hear one? If a click is heard, go to #4, if nothing is heard, go to #5
4. Well at least the relay is clicking, but nothing else is going on. The relay is working, so the starter must be bad. Replace the starter and start your car!
5. Humm, connections aren't the problem, maybe the relay is bad, replace your relay with a new one. Move on
6. Now we have a new relay, with clean and tight connections. Start your car. Does it start? If yes, then HORRAY! we fixed it. Does it click? If so then goto #7, If it don't click, then goto #8
7. So here we have a new relay, with good connections that will click when trying to start the car, but nothing else happens. Starter is faulty, replace the starter, and off you go, see ya!
8. So here we have a new relay, with good connections, but it still won't click when we try to start our car. This means that your starter switch is faulty. Replace starter switch and try to start your car. Vroom! finally done with this car problem!
List of shortcuts: if you remove the starter switch lead (small wire) from the relay and apply +12v to its respective prong or lead on the relay, and your starter cranks, your starter switch is faulty. You can actually hook up a starter button this way. If you jump the two large wires together on the relay and it cranks, then the relay is faulty. If you jump the two large wires together and nothing happens, then starter is faulty, or wires to starter are loose or broken.

1999 Plymouth... | Answered on Dec 15, 2013


Take it to your local parts store the light means it has stored a code they can hook up a computer and tell you what has failed.

1999 Plymouth... | Answered on Nov 07, 2013


they make a special screwdriver looking prybar tool just for removing the fasteners that hold in interior onto the door frame. once you remove this paneling youll be able to access the window mechanics

1999 Plymouth... | Answered on Oct 15, 2013


If you require a starter for this vehichle then the starter that is designed for it should be used. There are after market starters available for this vehichle here is aBosch part number for a 2.0 l SOHC/ DOHC neon SE is (446754 ).

1999 Plymouth... | Answered on Oct 14, 2013


About the only reasons I can think of for that to happen would be a hole or crack in the pick-up tube in the tank,an extreme amount of dirt in tank, or someone already replaced fuel pump and bent tube when installing it. Either way it sounds to me like your only way to find out for sure is to remove the pump assy. If It's the same as my 95' it will be accessible when you take passenger side rear wheel off, and look at tank, near top toward front of vehicle.

1999 Plymouth... | Answered on Oct 02, 2013


I suggest you have a repair shop do that

Was there a question there?

Lots to look at & watch on You Tube Video

Have to remove the fuel & tank holding straps

Not a nice or easy job,& surely not fun on your
back in the driveway

1999 Plymouth... | Answered on Aug 28, 2013

Not finding what you are looking for?
1999 Plymouth Neon Logo

178 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Plymouth Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Neon Plymouth

  • Neon Plymouth

Most Popular Question

not sure part missing pertaining air

  • Cars & Trucks
Loading...