2007 Mercedes-Benz E320 BLUETEC Sedan Logo
Posted on Mar 16, 2010

Need radio code for 1995 Mercedes Benz E320 sedan

Have 1995 Mercedes Benz E320 Sedan radio displays "code" across it need to know code to enter

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Apr 01, 2011
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Apr 01, 2011
Answers
1
Questions
0
Helped
1175
Points
7

Its inside your car manual on the left side as you open it up, it'll be a lil grey card that will have the radio code written on it... read the manual and it'll tell you how to put the numbers in.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1995 e320 mercedes sedan wont start only srs light comes on

SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system
1helpful
1answer

How to replace an engine belt on an 1995

I have two Mercedes - one is 2000 E320 Wagon; other is 1999 E320 Sedan.

I replaced the serpentine belt on my 2000 Wagon today at 92,000 miles. I found that the Motorcraft JK6-947 could be purchased on Ebay for $12.99 plus $6.20 shipping. The old belt was a Goodyear Gatorback 4060940. My 1999 sedan has a Mercedes Benz 011 997 97 92 6K2390 EM7117 Gates belt made in Spain.

Here are the details of replacing the belt.

On the 2000 E320, a 17 mm bolt just under the belt going to the tension pulley will release the belt tension when turned counterclockwise. Removal of the belt was easy after using a 17 mm deep socket wrench similar to a spark plug socket. I made turning the bolt very easy by slipping a 4' pipe over the socket wrench handle. It is advisable to put the new belt LAST on the idler pulley that contacts the belt only on the smooth side.

You do not need todisturb theButton Torx bolt in the center of the tension pully.

The 1999 E320 uses a 15 mm bolt in the CENTER of the tension pulley. Otherwise the installation is the same as the 2000 E320.
1helpful
1answer

The display on the radio and the radio wont come on its mercedes benz C230-1998. had to charge the battery

you will probably have to enter a code for your radio to work again, look in your owner's manual and if you do not have one then you will have to call a dealer and get the code or try searching online, sometimes you can get help there
1helpful
2answers

I have a 1993 300E MB I need to reset code for the radio

should be with your manuals for the car. If not take to a dealer to look it up.
0helpful
1answer
4helpful
1answer

My left turn signal will not turn off.

your control switch is faulty on the steering column
1helpful
1answer

Radio code for 1995 mercedez benz E320

you must got to the dealer for a radio code for you benz. sorry
1helpful
1answer

Radio code for 1995 mercedez benz E320

Usually the Mercedes dealer will give you the code if you are the owner of the vehicle and they might need the VIN# and sometimes the serial# on the radio too.
0helpful
1answer

MERCEDES E320/2004 WITH SERVICE ``D`` EXCEED

WHAT IS SERVICE D ON E320 2003 AND WHAT IS THE COST
Not finding what you are looking for?

1,185 views

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...