- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The rough answer uses the formula for the circumference of the drum: c = diameter at the cable layer. x pi If the cable layer is at the drum diameter of 6m, C = 6m x pi C = about 18.8 m If the cable is on a different layer with a different diameter, the answer will be different.
If your wiring a remote control to the winch or inside control,,, 4 solinoids type,,make sure the solinoids have ground on the brown wire(warn)...if you don't have a ground all it will do is click,,,even if power is applyed
Hello, there is two ways to remove the drums. First way is to use a hammer and tap the back side of the drum as you rotate it untill it becomes free. Second way is to use a brake spool to back the shoes off, on the back side of the drum is a small opening it may be covered by a piece of rubber. Just pop that out, using the brake spool rotate the star wheel key till the shoes are backed off the drum than it should come right off.
×