The lights on the little knob switch thing are now not working, I attempted to get on freeway and it started smelling like melted plastic or burning gears. ... it drives fine in town as long as long as i dont go over 40-45 mph. Any ideas?
Your probably stuck in 4wd low --check fuses -relays-modular and actuator
Testimonial: "where is that located?"
SOURCE: 2001 dodge ram 1500 brake lights
I would guess the brake fuse ( this does not use the same fuse as the tail lights/blinkers) or the ground for the brake light bulb.
SOURCE: How to activate 4wd hi/low on 2000 dodge durango slt
You need to get under the suv, there is a linkage under there that has 2 grommets. They dry rot and then fall out. Once that has happened the 2 pins that hold it together give way and the link is broken. If all you need are those 4 parts its $12 at the dealer. If you also need the adjustable metal linkage that joins the shifter to the transfer case you will have to order that too, sometimes it falls off when one end gets loose. It will swing around and hit the drive shaft and get yanked off. If you need more detail let me know.
SOURCE: service 4wd light is coming on but 4wd works fine
i had the same problem in my 99,i replaced the switch assembly on the dash and all is well,hope this helps
SOURCE: 2001 dodge durango 4 wheel drive not working loud knocking
You need to check the cv joints in the front end or the u joints in the front drive shaft.If none of the above then the problem is internal in the front diff.
SOURCE: 2001 Dodge Durango 4 wheel Drive doesnt work
i had same problem for almost 6 weeks . I just replaced my batty and it fixed the problem compleatly
94 views
Usually answered in minutes!
×