If it stays full, it has an open circuit and is probably the sender unit in the tank. If it stays on empty, it is grounded and could be a wire. Need to access the pump unit to test the system. Or hook up a scanner and see what it is telling you.
SOURCE: Hi hope you can assist.
In diesel engines when the engine starts blowing it means the engine is almost gone so it does when its overheated, your engine is eating mobil oil and will not cut off if its eating oil. your engine is bad now if you want to run it for a few days here is what you do
you should remove the blow overflow pipe from the intake side i.e which goes from the engine blow to the air intake side and hang it to the bottom of the engine it will blow out the blown oil into the air and your engine will cut off easy no problems but remember it will eat oil so keep it top up if bows up more oil put a plastic bottle at some place in the engine compartment and put the other end of the pipe in it when the bottle is filled in a day or two put it back in the engine and top up
or get the engine rebuilt do let me know when it works([email protected])
YES it sure works
SOURCE: torque setting for Isuzu 280 kb fly wheel
2nd post to usa forum that has zero kb trucks
you are in Africa,
buy the book there, we dont have data on KB here.
zero data.
lots of rumors sure.
219 views
Usually answered in minutes!
×