My 2006 cts has had problems with the right brake light, but when I use my key fob the light still turns on (yes the top, which is the brake light) not sure where to check next. help ppleaasssss
SOURCE: Right tail light not working when pressing brake w/ lights on.
There should be at least 2 bulbs in the light assembly. One light is the light that is on when you turn on your headlights with out the brake pressed, the other light only lights up while you press on the brake. Make sure you are replacing the correct bulb. You may have been replacing the bulb that stays on. Your lights may be set up to turn off the light that stays on when the headlights are on while pressing the brakes.
SOURCE: 2006 Mazda 3 Hatch brake lights not working
ur breask switch may be not working or wire is loose....also check ur globes,,,,some globes carry 2 functions.....normal light and brake light,,,,,so i assume you brake light globes need checking
Do you have a trailer harness? If so, your harness has a short in it.
Remove it and throw it away; cheaper to replace it than to repair it.
If not, you have a short in the socket at the brake lamp
SOURCE: 2008 CTS - Key fob doesn't always open the doors
The battery may need replacing. I've experience the same problem and the battery was the problem. Good luck. Ned
96 views
Usually answered in minutes!
×