Yes that ring has to move. Did you compare the shaft against the one you removed? Did you look into the hole to make sure nothing was in there like the old lock ring. If you think the lock ring is holding you back take it off the shaft and squeeze it together then reinstall. I hope this helps, Take care.
Took off ring and shaft still wont go all way in. The tip came off the original shaft. Help
Did you look into the transmission to make sure something isn't blocking the axle from seating? If OK I would try another axle.
×
Locking clip suppose to be fairly loose, but if it's too loose it will not go all the way in to lock the axle in place, so you have to help it to slide in place.
SOURCE: 2006 Pontiac G6 GTP window auto close/open
OMG. I replaced the battery in my 06 G6 and had the same problem. the windows would not roll up or down how they did before. I read the answers on here and it does work. Hold up the window switch for ten seconds and it resets. You will have to do it to each window. Worked great. Thanks
SOURCE: I have a 2006 Pontiac G6 with 88,000 miles on it
MOST AXLES WILL LAST THE LIFE OF THE CAR. THEY COST ABOUT $200 EACH TO REPLACE IN OUR SHOP. YOU CAN BUY REBUILT ONES FOR MOST AUTO STORES FOR $50-$75. EACH THANKS MOTOR62500!
SOURCE: what is the button looks like a primer button called on the radiator of a 07 pontiac g6
The "primer button" is a hard clear plastic, on the side of the radiator? This is a window so you can see level and circulation.
SOURCE: Trying to find a intermediate cv shaft for a 2006 pontiac g6? Looked everywhere online
I guss im not getting what your looking for its not a CV join or a half shaft, or at input shaft ,I couldent find any thing that matches ,intermediate CV and there are 3 different motors for this can not knowing if that makes ant difference, did you try trann sites, or speed oem parts people
Probably only available at the dealer.
55 views
Usually answered in minutes!
×