2010 Dodge Journey will not start flashing red light comes on stater don’t turn over

SOURCE: How to get at the

First, you will need to jack up the driver side front wheel.
Then, remove the wheel.
With the wheel off, you can remove the plastic fasteners holding the battery access panel (bottom front section of inner wheel well).
After you remove the cover you can reach in and disconnect the cables, then remove the battery.

Hope this helps!

SOURCE: 09 DODGE JOURNEY INTERMITTEN NO

mine does the same turn key, put in neutral... works every time

SOURCE: how do you remove battery on 2010 dodge journey

remove left front wheel and splash panel and you will see the battery

vegas devildog

• 373 Answers
• Posted on Sep 19, 2012

SOURCE: lights on driver's side don't work

most dodge have two fuse box one under the hood and the other open the driver's door there should be a fuse box on the side of the dash board

Testimonial: "Thank you, my wife misplaced the manual."

SOURCE: My dodge ram 1500 won't start, the lights won't turn on, the radio does not work. The red light on the dash flashes as does the map lights and the odometer

have battery tested if good fully charge,then check all relays and fuses.