Please be more specific with your question
SOURCE: break kight burned out
Open the liftgat and you should see the screws on the side of the lamp. Unscrew then and pull the lamp away from the vehicle. There should be sockets in the tailamp that screw in and out about the size on a half dollar. Pull this out and pull the bulb out straight and replace by pushing in a new bulb. Follow these directions backwards to replace the lamp. Hope this helps.
SOURCE: 02 jeep liberty won't shift into 3rd or 4th gear.
Ratio codes generally indicate a pressure loss & slipping which the computer reads as a gear ratio problem. Likely you need a rebuild.
SOURCE: why wont my 97 jeep grand cherokee shift from 2nd
Sounds like the governer in the tail housing of the trany. is stuck. Or if it has a cable for the shiftting mechanicanism that runs to the throtel body the cable may be broken or out of adjustment.
SOURCE: 1994 jeep yj automatic wont shift into 3rd gear
Hey bro, pumps might be gummed up. Easiest thing I can suggest is go through all the gears manually to empty the pumps in the auto transmission. Then try it again. If no joy, then I'd change the transmission fluid and toss in some lucas oil transmission fix. Probably run you 40$ for the oil and lucas and take 30 min. It has saved my **** a few times and might just work. If it doesn't then you probably will need a new transmission, it is cheaper to replace it than to repair it in most cercumstances. Try the oil first, it's cheap and quick. Don't forget the lucas. And make sure to go through all the gears manually to empty the pumps. Cheers bro.
SOURCE: where is the ac drainage, 2006 jeep comander
passenger side under the truck near bottom of engine firewall.
515 views
Usually answered in minutes!
×