Here's a video where it is and how to replace....
https://www.youtube.com/watch?v=_xoGyRrHYbM
Best to you.
SOURCE: crank positioning censor
The camshaft position sensor is located on the timing cover on the front of the engine. The crankshaft position sensor is located just above the differential on the transaxle bell housing where it has to be to read from the flywheel the position of the crankshaft. It is easy to see from the front of the engine even though it is on the back half. Just look for the shifter cable and where its bracket ends (on the firewall side of the bracket) glance about 12" to the left and you should have no problem finding it. An 8 mm bolt is holding it in and with that bolt taken out it just pulls out of its hole. Google "95 caravan crankshaft position sensor" and then pick IMAGES so you can see an actual picture of what it looks like.
SOURCE: 2005 Subaru Baja Crank Shaft Position Sensor
is there a problem using e10 ethonal in a subaru impreza wrx 2003
SOURCE: crank shaft position sensor located hyundai sonta 2004 v6
On a 2.7L it is located above and to the right of the starter. You will have remove the starter heat shield to gain access to it.
SOURCE: Where is the crank shaft positioning sensor
Look at the area around the crankshaft pulley. It's bolted to the block and senses the crank position. If it fails, You won't have an ignition spark. Good Luck, Ned
SOURCE: Where is the crank shaft position sensor located
should be on front of block like behind harm balancer has wires going to it and a plug on it
479 views
Usually answered in minutes!
×