Not to worry friend, when my car go sick i avoided going to mechanic looking for DIY_Repair when I found this website https://big-manuals.com/products/ford-ranger-1998-2006-workshop-service-manual
and this book helped me repair it within an hour, all by myself!!!! It's amazing, no hassle at all
From wiring diagrams, schematic illustrations, spark plugs info, parts info, stepwise instructions, torque s pecs, error/fault codes, engine info, to every single minute parts, you get everythingg in there you can't imagine how detailed it is
SOURCE: 87 samurai bolt torque specs for engine
The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.
The factory service manual is the only way to go.
Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)
Intake & exhuast manifolds- 13.5 - 20 lbs
Flywheel - 41.5 - 47 lbs
Clutch cover - 13.5 - 20 lbs
SOURCE: head bolt torque specs for 2000 dodge neon 2.0 SOHC
I have the specs and diagrams. If you want me to send them to you, give me your email address. [email protected]
SOURCE: looking for torque specs and sequence of both
Lower intake bolts 11 ft. lbs start in the center of the intake and work your way out cross from side to side.Tighten the upper intake bolts with the same procedure with 89 inch pds.Be sure to apply threadlocker to the lower intake bolt threads.
SOURCE: ford 4.2 intake manifold torque specs &
Torque specs for a 2003 f 150 4.2 L.
first pass 53 lb-in, second pass 89 lb-in
lower plenum
upper plenum
Hi the torque spec for this fuel rail/manifold is 9-11lb/ft. Here is pic of the sequence.
torque spec is 20 -28 ft pound.here is the sequence.thankyou.ramundoo
794 views
Usually answered in minutes!
×