How do I reset the service alert after an oil change

Service engine soon ? Do you mean SERVICE VEHICLE SOON Indicator
The amber SERVICE VEHICLE SOON indicator is an alert to the driver whenever there are specific current codes stored in the BCM or in the event of a loss of Class 2 serial data.

If your vehicle has a check engine light ,it doesn't have service engine soon .One or the other .

The bobcats I have worked on do not have this feature.
Bobcat oil change hours reset
https://www.youtube.com/watch?v=vRMyylISKlc

Better sound
How to Reset Oil hour meter on a e50 Excavator The Bobcat Guy
https://www.youtube.com/watch?v=ueDKdAenZkU

Reset Service Interval - Quick Tip
https://www.youtube.com/watch?v=gMl0jSx_1Kw

This alert should have been reset when the oil was changed by the mechanic before you left his/her shop.

One possibility is that the reminder cycle was not properly reset to coincide with you next planned oil change or you might have a defective oil levle sensor - not a common problem with these cars.

if you just had the oil and filter changed..the technician did not reset the alert in the cars command module..therefor the check engine light will come on until this alert is removed from the start up sequence in the cars' computer.. get that done and it should be fine..

I believe it means that your car is due for an oil change. Your cars computer is programmed to turn that light on every so many miles to alert you and then after you change to oil there is a procedure to reset it. You owners manual should tell you this information of what the light means and how to reset it. If you do not have the manual call your local dealer and ask the service dept. what it means for sure and they should tell you over the phone and if it's a good dealer they will tell you how to reset it.

Yes. that alert indicates that your car's internal computer has detected one or more errors. In order to find out what these error codes are, the computer must be scanned. Dealerships usually charge quite a bit to do a scan. Recently AAMCO repair shops have been offering scans for free. Also many auto parts stores scan for free. When you do get it scanned be sure to ask the techie to reset the computer. Joe

4 thumbs up please. ty.

Check youtube someone may have already made a video on how to re set it.

Perform service indicator warning is a heads up that another oil change is needed. Your vehicles computer calculates a duty cycle for service intervals; Driving distance, stop and go etc... Change the engine oil, and reset the alert, and you'll be fine.

you can reset the oil light by turning the key to on, but not starting it, then push the gas to the floor twice, then again...it should say oil life reset