I See 8 to 12 arches of electricity going inbetween spark plug wires. Spark plug wires are new, exaust is new but incomplete no muffler. Please help
SOURCE: changed spark plugs and wires now car wont start
I know this might be obvious but the obvious is often the problem. Did you replace the coil wire that goes from your coil to the distributor cap? Also, double check to be sure that your wires are connected in the correct order. A little more clarification might help. Does it turn over? Does it just click? When you turn the ignition key then let off does the car clunk or make a wheezing sound?
SOURCE: wont run
The problem may be with the distributor try to find a cheap used one at a junk yard, the same thing happened to my dads 1990 ramcharger
SOURCE: I have an intermitant problem
u either have a defective crankshaft position sensor or a defective ignition module.
SOURCE: 1988 3.8 olds cutlass Ciera stalls, no spark until it cools down
Check the prrimary and secondary resistance on your coil. Also check the resistance of the plug wires and plug gap.
SOURCE: Changing spark plugs on a 1995 Oldsmobile Cutlass Ciera
ALL YOU NEED IS 3/8 RATCHET WITH A 5/8 SPARK PLUG SOCKET.YOU NEED EXTENSIONS AND UNIVERSAL JOINTS TO GET TO HARD TO REACH PLACES.YOU NEED A SPARK PLUG GAUGE.YOUR SPARK PLUG GAP SETTING WILL BE. 0.060 THAT WILL BE FOR THE 2.2 AND 3.1 ENGINES.
Testimonial: "Thank you very much for your advice and time!"
126 views
Usually answered in minutes!
×