2002 Mazda Protege Logo

Related Topics:

I need a diagram of pcv valve location for 2002 mazda protege

5 Related Answers

Anonymous

  • 3533 Answers
  • Posted on Feb 11, 2009

SOURCE: need the fuse box diagram

the fuse box lid normally has a diagram on it there is a fuse box under the dash on the driver side and there is one under the hood as well.and if it does not have a diagram stop by the dealer in the parts department and they can print you one if you have an owner manual there is one in there also.

Ad
old marine

old marine

  • 2426 Answers
  • Posted on Mar 10, 2009

SOURCE: replace alternator belt 97 mazda protege

Here's the page from the AutoZone online manual for replacing drive belts.

c17hydro

Greg Bernett

  • 2993 Answers
  • Posted on Jun 28, 2009

SOURCE: fuse box diagram

Hope this helps...let me know and I will get a better one:

081afc9.gif

Anonymous

  • 32 Answers
  • Posted on Oct 02, 2009

SOURCE: obd2 code p0300 on mazda protege 2002

Just had one of these with a maxima, the code is multiple random misfire, when a misfire occurs, to start is do the basics, replace the plugs, check fuel pressure, clean throttle body, and coolant is topped up. also I have seen if the O2 sensor is not working correctly is can cause a misfire, you will need a scan tool to look at what the O2 sensor is doing, o rby back probing the sensor (don't damage the O2 sensor wires). If it wires replace them as well, if it has coils they usually dont give that code if one fails, it will pinpoint that a certain coil if one fals.

Anonymous

  • 75 Answers
  • Posted on Oct 19, 2010

SOURCE: I need a belt diagram for - 2002 mazda protege

7feb5ea.gif

Here you go!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

What is the part name for the hose on top of my Protege DX valve cover?

Just the hose or the PCV (not pvc) valve? The hose is probably a dealer-only item - go to the Mazda parts department w/the broken piece and they'll get you a new one. The PCV is avl. @ most auto parts stores - and is cheap - <$20.

GL,
Td
1helpful
1answer

Where is the EGR valve on a mazda protege 5

I own a 2002 Mazda Protege5 with the FS2.0 Motor. The EGR Valve is located below the throttle-body. You must take off the Intake tube to get a good view of it. To replace it I think you might have to take off the throttle-body, but I'm not sure about that...(yet)


NOTE: Mazda put out a technical note stating that "if your car has sat for a long time, the egr valve could be damaged by moisture (rain) and will need to be replaced". My 2002 Protege sat for 3 weeks and the rain caused this exact issue and had to be replaced. How did I know? The engine light came on (after never coming on) and the car had an extremely rough idle. Total cost was ~$400 (ouch).

2helpful
1answer

Were is the egr valve located for mazda rotege5

2002 Mazda Protege5 with the FS2.0 Motor. The EGR Valve is located below the throttle-body. You must take off the Intake tube to get a good view of it. To replace it I think you might have to take off the throttle-body.

0335fe8.jpg

Fig. Exploded view of the intake manifold assembly with 2.0L (FS) engine

Good luck (remember rated this).
0helpful
1answer
0helpful
1answer

How to replace the serpentine belt of protege 5 2002, also need the routing diagram

Posted by Asker under 1997 Mazda Protege for their 2002 Mazda Protege 5.
Both are included Below

Click on the following free direct Link. It has the Belt Diagrams for the 1997 Mazda Protege with either the 1.5L DOHC In-Line 4-Cylinder or 1.8L DOHC In-Line 4-Cylinder Engines; along with various engine options (AC/No AC, etc.). Included are Instrucional Diagrams for loosening (for removal) and tightening (for replacement) using the Adjustment and Locking Bolts/Nuts.
http://www.2carpros.com/car_repair_information/year/1997/make/mazda/model/protege/1997_mazda_protege_drive_belt_routing_diagram.htm

Click on the following free direct Link. It has the Belt Diagrams for your 2002 Mazda Protege 5 2.0L DOHC In-Line 4-Cylinder Engine; along with various engine options (AC/No AC, etc.). Included are Instructional Diagrams for loosening (for removal) and tightening (for replacement) using the Adjustment and Locking Bolts/Nuts.
http://www.2carpros.com/car_repair_information/year/2002/make/mazda/model/protege5/2002_mazda_protege5_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!
0helpful
1answer

Replace rear pads on a mazda protege es 2002

try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
1helpful
1answer

2002 Mazda Protege horn location

Their are usually in back of grille or on the underside of rails. you will need to take off the front bumper to get access.
Not finding what you are looking for?

465 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...