VIN number location in Chrysler 300M transmission

Generally .... the engine number will be always be stamped on the engine block just below the cylinder head. A number of Chrysler engines have it on the rear left side (driver side if not transverse mounted) ... but it can be on the front too. The key is to look right below where the head mates to the block. You may have to scrape/wire brush to see it. Attached video link shows on an older mopar smallblock engine.
Also ... depending on what you are looking for the VIN number (much easier to access) can tell a bit about the engine. In the series of numbers and letters, the tenth from the left in the VIN number denotes the model year and the eighth is the engine code.
Good luck on your troubleshooting

http://www.fixya.com/cars/t24252494-find_vin_number_engine_matches

follow by the arrow at the image

make year and model?

Take a look on attached image. But engine number is not the same as vin, it has own nomenclature. So if you want to replace engine you should find one with similar number

does not have drain plug, on this car you have to remove the oil pane if you want to change or servicing

Can be located on the output shaft of the transmission. Look for 2 or 3 wire harness leading to a black object near the rear of the transmission closest to the drive shaft.

Depending on Your vehicle engine model, Vin #'s K, M, with a 3.5 ltr engine, the torque spec are 109 in lbs.

If the engine Vin # is a V, then the torque 113 in lbs

go to autozone site..register the VIN and click on repair tab...you can get diagrams there

hi,
i have attached a schematic diagram, showing the drain plug for your transmission system. please have a look at it. i am sure it solves the problem.please rate my solution as helpful.thanks and regards, venu. have a great day.

The Remote Keyless Entry (RKE) Module is located between the Junction Block and Body Control Module.
THIS CAR COME WITH 4 DIFERENT ENGINES SAME ENGINE SIZE BUT DIFERENT INJECTION SYSTEM THIS information is for a 3.5 vin (G ) the engine vin code is on the vehicle identification number and is the 8th digit from left to right