Pulling the ecm fuse 2004 Chevy venture - 2004 Chevrolet Venture Passanger ???????????
SOURCE: Thermostat in a 2003 chevy venture van
no you dont need a special tool you have to take the throttle body off it makes it sooooooo much more simple.
SOURCE: 2004 chevy venture mini van front suspension
i think you need to take a look at your front axle. I htink a worn ruber seal may have let debris get into the axle or even the bearings.
SOURCE: 2004 Chevy Venture will not shift into gear
Had neighbor look at this same problem. Turned out the shifter cable linkage near the top of transmission had popped off. They popped it back on and works but a bushing in the clip probably needs replaced. The neighbor rewched over engined top between firewall and engine and popped it back on.
Works fine but does needs a clip/bushing part and auto parts store has to get from Chevy
SOURCE: Need fuse box layout for 2004 Chevy Venture. Need
its printed on the fuse box cover or behind the cover or you have to see the fuses one by one
SOURCE: Where is the fuse box located on a 2004 Chevy
Check under the dash on the driver's side, and under the hood for a fuse box. Check for a slew of spaghetti-like set of wires of various colors in a thick harness loom going to the fuse box.
557 views
Usually answered in minutes!
×