SOURCE: 1997 ford explorer V8 5.0 engine
P1405-Differential Pressure Feedback Electronic (DPFE) sensor upstream hose off or plugged - or cracked.
I believe it is on the driver's side of engine about half-way down. also, check all other hoses for damage
SOURCE: Describe your 1996 Ford Explorer Problem..trouble
Diagnostic Trouble Code (DTC) P0443 indicates a failure in the EVAP canister
purge valve circuit.
Possible causes:
SOURCE: my 2005 ford explorer 4x4 xlt (v8 4.6 ltr)has
P2106 is an informational code and is usually set by some other fault.
This DTC means is that the PCM detected a fault with the electronic throttle
control and went into fail safe mode. It doesn't tell you specifically
what system or component went haywire, just that something was wrong,
the PCM didn't know what to do so it went to a known good operating
parameter, in this case fail safe mode. Likely is a problem with the TPS sensor and will need to be replaced.
Hope this helps.
677 views
Usually answered in minutes!
×