I have a 2017 Forester limited model. How do I set the clock so that it wil automatically change to the correct time zone.

https://www.nissan.co.il/content/dam/Nissan/israel/services/car-books/Nissan-Xtrail-Car-Book-2016-ENG.pdf

Page 4-5

Clock:
Select the corresponding keys to adjust the settings.
• Time Format:
The time setting can be selected from 12 hour
and 24 hour formats.
• Date Format:
The day, month and year display can be selected
from five formats.
• Clock Mode:
Select the clock mode from Manual, Time Zone
and Auto.
When [Manual] is selected, you can set the clock
mode manually from the [SET CLOCK MANUALLY] screen.
Select [Auto] to automatically maintain the time
using GPS.
• Set Clock Manually:
Mode (AM/PM) (where fitted), Hours, Minutes,
Day, Month and Year can be set manually if
[Manual] is selected in the Clock Mode setting.
• Daylight Savings Time:
Turns the daylight savings time on or off.
• Time Zone:
Select the applicable time zone from the list.

Had the same problem and figured it out (not AT ALL intuitive).

To change time zone:
1) Toggle the "MODE" button over to ALARM function.
2) Press the "SET" button and this will switch time zones.

Hope that helps ease the same frustration I felt.

Yes this is a little confusing!! It is set from the Nav window. Depress Nav and scroll down to clock.

Depress clock and you can daylight savings option or set clock

Hope this helps?

Other Jeep Radios
1. Press the MENU hard-key on the right side of the
radio.
2. Then press the System Setup soft-key to get to the
System Setup menu.

Set the Time
1. Press the time soft-key in the lower left corner of the
screen.
The minutes are set by the GPS system.
2. Press the Set Time Zone soft-key to change to the
desired time zone.
3. Press the Daylight Savings soft-key to switch Daylight
Savings on or off.
It is possible to set up your own time (ahead or behind
actual GPS time), by pressing the USER CLOCK soft-key.
NAVIGATION 15

Weird, are you resetting the clock and finishing the setting as per your manual. Your navigation zone could be throwing it off, make sure you have correct zone for where you are. press the helpful button, and check video link below.

How to Set Clock and Search Area on 2010 and 2011 GMC full size Navigation

How to Set the Clock on GMC Yukon 2007 2013 2008 GMC Yukon Denali 6 2L V8

Make sure the clock is set to the correct time zone before trying to set the time.

The clock works, correct? It is just not illuminating when your headlights are turned on? If this is the case then it is most likely that you have 2 burned out bulbs. The forester clock bulb is Sylvania bulb part #2723

Hope that helps! I have a bunch of clock related info on my website www.autoclockrepair.com. Let me know if I can be of assistance.

Hello, here is the instructions for setting your clock on this vehicle.


Press the H or the M button to enter the clock mode. Press and hold H until the correct hour appears on the display. Press and hold M until the correct minute appears on the display.
To change the time default setting from 12 hour to 24 hour, press either the H or the M button to enter the clock mode. Press the tune knob to select between the 12 or 24 hour display format. The clock mode automatically times out with the changed display format set as the current default setting.

Is this for a 1999 Forester or for a 2004 forester, the title lists both years. If it is a 1999 model then the problem most likely resides within the clock itself. Unfortunately, many clocks of this vintage go bad over time. I offer a reasonable repair service and many clock removal instruction sheets at www.autoclockrepair.com
I'd be happy to assist.

you don't - it is set automatically by the nav system - just put it in the correct time zone