I've been told that the transmission needs to be rebuilt . Do I need to pull out the engine in order to rebuild. What About the front axles. It is sad.
SOURCE: where is sensor 1 bank 1 located on lexus rx 300 2002
facing engine bank1 sensor 1 should be the one at the firewall area in the manifold
SOURCE: How do I remove Head Light assembly
Just found this site with your answer.
http://www.toyotanation.com/forum/showthread.php?t=269762
SOURCE: How to remove the door panel of a 1999 Lexus RX 300
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
SOURCE: Replace front side running light in a 2000 Lexus RX300
Unscrew 3 - 4 screws on the front tire fendor cover close to your side marker light. Pull the fender cover out, use your other hand to reach the side marker light. Using twist and pull the light set out. Replace a new light bulb. Replace everything in a reverse order.
SOURCE: 07 lexus rx 350 with check engine light code p0304
Hi, did you ever get an answer? I have the same issue. Thanks.
1,241 views
Usually answered in minutes!
×