At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
paper clip trick and ignition on
flash engine light count for codes list
might be online somewhere
anything on youtube to do this with the 1998 ford explorer ?
first you will need to know which pins to bridge on the diagnostic port
the overdrive light flashing on a A4Od transmission is a fault signal for the transmission , just like a ck engine light but for the transmission only , get a code read to find the fault stored in the ecm and then you'll know what exactly it is
its very common for engine swaps to have a few intermittent sensor failures on restart due to the connectors all getting maybe not all the care and protection they deserve in the swap (plastic baggies) and having a bit of dirt and corrosion in them now (spray contact cleaner)
with the od in/out/in/out an educated guess is that the engine throttle position sensor is not being read now , but a code reader will tell all
any time the check engine light is flashing it is the on-board computertelling you that the engine is misfiring, i think i would take it back to whom done the tune-up sounds like they may have cracked a spark plug or damaged a plug wire when they tuned it up.
when this light is flashing it means the the actuator for the Transfer case has a problem or the transfer case is locked up, the only way to determine the cause is to remove and test the motor and see if it operates, the electric motor driven actuator is under the truck attached to the transfer case at rear of transmission.
The OD light is flashing to alert u to the fact that some kind of fault has occured in the transmission, the problem is in many cases a slipping condition, you need to have the trans control system tested for the trouble codes that are stored when this light flashes, this will let u know what the problem is and a direction to follow to repair it.
Some vehicles you can disconnect the battery for 10-20 mins and it usually resets a check engine light. But the airbag light is different. This means there is something wrong with the airbag system and it will not go out until maintenance.
×