You have to go back and find out what is it missing? Compression, spark, fuel, injector pulse, timing? Start with basics and double check what you have worked on, all connections ect.,battery fully charged.
Check your anti theft
SOURCE: 2001 chevy tracker
Hi,If you are mechanicly inclined replacing the timing belt should be simple ,If the car still runing be sure to aling the timing marks perfect and make a note of the position in a piece of paper,If not you can get the specs at the auto parts where you get the belt ...YES they can jump do to wear and they can cause valves to bend ,this can also cause major engine damage....
SOURCE: oxygen sensor 2000 2 liter Tracker
You have an heated Oxygen sensor. 2 of the wires heat up the sensor and keep it at a certain temperature, it is turned on and off by the computer. The other 2 are use to send a very low voltage reading back to the computer to tell the computer if the engine is running rich or lean. I don't have a diagram to tell you which wire does what but you can get a manual and that should give you the information that you need and tell you how to trouble shoot it to tell if the sensor is bad or not, you may want to look for a wire laying on the exhaust, I have found wires burnt and lay on the metal.
SOURCE: 2001 chevrolet tracker engine cranks but won't start
You have wet ignition components. Get an air hose and blow dry everything you can get to. You may even have to let it sit to dry out.
SOURCE: Timing Chain Cover, Chain, Sprockets, replacement
2.2L VIN 4
To Remove:
To Install:
SOURCE: TIMING CHAIN GUIDES WERE DAMAGED
Here you have all step by step instructions & photos for timing chain replacement.
http://www.bimmerboard.com/forums/posts/876903
Good Luck!
144 views
Usually answered in minutes!
×