If you know your light bulb works when you visually checked them or when you turn on the hazard light switch on?
then it may be a fuse or the switch
if you turn on the hazard lights switch, most vehicles uses the same light bulbs and relay
if your hazard lights aren't working as well & you know your fuses are OK,
http://www.justanswer.com/hyundai/71z33-... that link says it may be a hazard light switch itself
×
SOURCE: 2005 hyundai sonata
first try a new light ,maybe both of your low beams are bad ,check fuses.maybe your dimmer switch is bad
SOURCE: 2005 Hyundai Sonata cranks, no spark
usually the distributor MODULE
they are renound for this sort of drama
get the wiring checked aswell as it may be due to faulty charging & causing computor errors [I hope you didnt short out the battery when you changed it!!!! ]
SOURCE: driver's side headlight in a 2005 hyundai sonata
Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.
SOURCE: How to shut the alarm on 2005 Hyundai sonata
no valet switch,you will have to replace batteries/keypad to make it work and you CANNOT bypass the system......otherwise whats the point in fitting it??
SOURCE: WEAR IS THE CAMSHAFT POSTION SENSOR ON A 2005 HYUNDIA SONATA V6 2.7L
It is buried under fuel hoses and vacuum lines follow top radiator hose to engine under fuel line between air cleaner box and head
Camshaft Position Sensor High Input
Possible Causes:
CMP (Hall) sensor signal circuit is open or shorted to ground.CMP (Hall) sensor ground circuit is open.CMP (Hall) sensor power circuit is open (check fuse in the I/P).CMP (Hall) sensor is damaged or has failed.PCM has failed.The other code is not listed in this listing.
427 views
Usually answered in minutes!
×