OEM were these
http://www.carid.com/2006-hyundai-tiburon-brakes/powerstop-1-click-oe-replacement-brake-kit-31487698.html
SOURCE: 2005 Huyndai Tiburon Brake Replacement
hi assume you wish to fit new pads ? if so the the rear caliper pistons are not as front calipers just push back you have to wind back the pistons whilst applying pressure to piston there is a tool specially for this purpose which saves time and effort cheapest un uk is the one made by draper tool Co see motor stores? however! you can improvise and manually wind pistons back using the U shape spanner with 2x prongs that is commonly used/supplied to circular saws and this is spanner for changing blades ? does the trick if you have or can borrow one? look at pistons and you will see where tool locates you just turn c/wise and press piston as you do and it will retract have a little patience! the most important tool in the box that money can't buy ! hope this helps best wishes from uk
SOURCE: i have an 06 hyundai tiburon gt v6 and im
On cars with 4 wheel disc brakes the rear calipers are what they call racheting.The pison needs to be turned clockwise at the same time you are pushing in.This mechanisum is for the E brake system.They make special tools for doing this that you can pick up at your local parts store.
SOURCE: change brake light switch
The switch is located under the drivers side dash behind the brake peddle arm.
SOURCE: 2003 Hyundai Tiburon Se overheating!
if there's water coming out of the exhaust pipe its a head gasket but it could be a bad thermostat and when your car gets to a certain temperature the fan will come on and cool it off
SOURCE: 2003 Hyundai tiburon rear brakes
2 solutions, try harder or buy a new rear right caliper. PS: check the prices on the web, the dealer will charge you tooooo much.
295 views
Usually answered in minutes!
×