Where can I find a diagram of a Serpentine belt ?

Hi Gary,here's a link to Autozones repair guides,you can join their site and become member like me and use all their repairs guides like me and it's free.This link has your belt diagram and other diagrams for all the engines listed for 2002 model Repair Guides Engine Mechanical Components Accessory Drive Belts 1...

if you e mail me at [email protected] and i will send you diagram ( for free of coarse )

Here is a serpentine belt diagram for a Ford E350 Diesel Van: http://serpentinebeltreplacement.com/1994-ford-econoline-e350-v8-7-3l-diesel-serpentine-belt-diagram/

Fig. Accessory serpentine belt routing-4.3L, 5.0L and 5.7L engines without A/C




Fig. Accessory serpentine belt routing-4.3L, 5.0L and 5.7L engines with A/C

Fig. Accessory serpentine belt routing-6.5L Diesel engines

Fig. Accessory serpentine belt routing-6.6L Diesel engines

Hope this helps (remember to rate this answer).

AutoZone.com does not show serpentine belt for this engine. See their diagram below:

Check this diagrams (click for zoom)...



Fig. Accessory serpentine belt routing-2004-05 5.9L Diesel engines with A/C





Fig. Accessory serpentine belt routing-2004-05 5.9L Diesel engines without A/C

Hope helps (remember rated this).

You didn't list your motor size so please pick the applicable diagram:


Accessory serpentine belt routing—4.8L, 5.3L & 6.0L engines


Accessory serpentine belt routing—5.7L engines with A/C


Accessory serpentine belt routing—5.7L engines without A/C


Accessory serpentine belt routing—6.5L Diesel engines


Accessory serpentine belt routing—7.4L engines


Accessory serpentine belt routing—8.1L engines

Here is a diagram for a 5.7L Hemi, and 1 for a 5.9L diesel. Hope this helps!

5,7L HEMI

5.9L Diesel

5.9L DIESEL
The 5.9L diesel engine accessory drive system (with a/c) consists of :

1. Generator Pulley (1)
2. Water Pump Pulley (2)
3. Idler Pulley (3)
4. Power Steering Pump Pulley (4)
5. Radiator Fan Pulley (5)
6. Crankshaft Pulley (6)
7. Automatic Tensioner (7)
8. A/C Compressor Pump Pulley (8)

CAUTION: When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating in wrong direction. Refer to or for correct engine belt routing. The correct belt with correct length must be used.
1. Position drive belt over all pulleys except water pump pulley. 2. Attach a 1/2 inch ratchet to tensioner.


The 5.9L diesel engine accessory drive system (without a/c) consists of :

1. Generator Pulley (1)
2. Water Pump Pulley (2)
3. Idler Pulley (3)
4. Power Steering Pump Pulley (4)
5. Radiator Fan Pulley (5)
6. Crankshaft Pulley (6)
7. Automatic Tensioner (7)

3. Rotate ratchet and belt tensioner clockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove ratchet. Be sure belt is properly seated on all pulleys.