When you stand infront of the car. open the bonnet, look where the engine and gearbox join. left of the gearbox and engine joint. below the head and above the sump. a black sensor with one 10m bolt. one black wire about 4mm thick which plug into a wire coming from the top of the engine. see picture 
SOURCE: Crankshaft Position Sensor
the dual crankshaft position sensor is secured in an aluminum mounting bracket and bolted to the left side of the timing chain cover, partially behind the crankshaft balancer, hope this helps get back to me if you need mre help. please rate my fix as i strive to be the best
SOURCE: 2004 DODGE STRATUS 2.7L, Location of Crankshaft Position Sensor?
it is located on the right side of the motor, in the trans area. Actually in the bell housing.
SOURCE: trying to find the fuel filter in a 2006 Hyundai Accent
YEP! It's in the fuel tank at the bottom of the fuel pump... it's called a 'SOCK.'
SOURCE: 2001 Hyundai accent crank position sensor needs
Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.
SOURCE: were is the crankshaft position sensor located on 2001 chevy mali
It mounts in the side of the block near the crankshaft,it fits in a hole,going into the engine block.,look on the inside of the engine compartment ,on the firewall side,left of the pulleys,down low.
1,290 views
Usually answered in minutes!
×