1999 Lexus LX470 Logo

Related Topics:

A
Anonymous Posted on Jul 29, 2014
Be the first to answer

Cam timimg marks on lexus 1999 which dots 1 or 2

Hey who know which here on the left bank cam the timing mark is it the 1 dot or the 2 dot to b lined up with

Answer This Question

3 Related Answers

madisontech

  • 30 Answers
  • Posted on Feb 06, 2009

SOURCE: lexus es 250 1990

the marks on the cam sprockets point up and they should align with the marks on the rear timing belt cover (behind the sprockets)

Ad

Patrick Rayome

  • 1757 Answers
  • Posted on Mar 20, 2010

SOURCE: I need to know the timing marks for a 1995 lexus

My sincere apologies for the severly delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it in case you still do.

Click on the following direct Link. It has several Diagrams for your Timing Belt.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1995/make/lexus/model/gs_300/1995_lexus_gs_300_timing_belt_diagram_marks.htm

Patrick Rayome

  • 1757 Answers
  • Posted on Mar 28, 2010

SOURCE: NEED THE TIMING MARKS ON MAIN CRANKSHAFT LEFT CAM

Sorry for the delay.
I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt/MARK(S) Diagrams that you will need, complete with Instructional and Directional Diagrams.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/1993/make/lexus/model/es_300/1993_lexus_es_300_timing_belt_diagram_marks.htm

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2001 Camry V6 1MZ-FE. Per the FSM, the alignment marks between the exhaust and intake cam gears should have two dots on the RH (rear) bank, and one dot on the LF (front) bank.
I am not familiar with the engine so I am unable to tell you whether the camshafts are interchangeable but I speculate the most likely scenario is the sprockets are dimensionally the same and in that case it would be the usual practice to engrave the intake timing mark one face and the exhaust timing mark on the other. Where the timing marks share the same relationship with the keyway it wouldn't really matter which wheel was fitted to which cam and which way around.,.
Read full answer
Jun 01, 2019 • Cars & Trucks
0helpful
1answer

How are the 2 dot 1 dot on the overhead cams aligned for Lexus ES 300 1995
Hi. Thanks for your question. For overhead cams ypu can refer to https://www.reliable-store.com and download the entire service manual which includes all the information along with the diagrams for better understanding. Good day!
Read full answer
Feb 27, 2018 • Lexus ES 300 Cars & Trucks
0helpful
1answer

1999 lexus LX470 does the timing mark on the left bank line up with the single dot or the double dot if i line up with the double dot (as per manual) the pully for the timing belt points down 180 degr
looking from the front of the engine , the pulley mark on the LH cam pulley lines (12o'clock) up with the centre of the 2 notches and the RH lines up (12 o'clock) with the single notch. On the crank one mark will be lined up with a single notch at about the 1 o'clock position and another at the 3 o'clock position lined up with a series of dots. Ensure that you have the piston on TDC no1 first and align the crank marks first.
Read full answer
Jul 30, 2014 • 1999 Lexus LX470
0helpful
1answer

Lexus lx470 on the left bank cam which dot do i line up 1 dot or th 2 dots
here's a u-tube link for a very detailed demonstration of the whole procedure, the actual vehicle in the video is a lexus lx 470
How To Change The Timing Belt In Toyota V8 2UZ FE 3UZ FE Tundra Sequoia...
Read full answer
Jul 24, 2014 • 1999 Lexus LX470
0helpful
1answer

I KNOW IT IS 123456 BUT I wanted to know where they go do they fire ? 12/34/56/? or do they fire 14/36/52??
The #1 cylinder is on the passenger side front, those are cylinders 1,3,5 the other side are 2,4,6 counting from the front.
#1 coil also fires #4, #3 coil fires #6 and #5 also fires #2.
The cam gears on the middle of the cams are two piece spring loaded gears, there is a hole for a bolt to go in after the two pieces are lined up until the cams are installed then the bolts are removed, if you have any kind of manual it should mention this. The two dats are called assembly marks and are not the timing marks, the timing marls are the single dots, they use the assembly marks so that when the cams are in you can remove the 10mm bolt from the gears. let me know if you need some illustrations for those marks and I'll see if I can upload something for you but it may be tomorrow.
Read full answer
Jun 09, 2017 • 1996 Toyota T100
9helpful
2answers

Ed to know what marks to use on the exhaust cam there are 2 single dots and a double dot should i use the double dot to line up the cam timing\
TIMING MARKS ON CAMSHAFT SPROCKET A LITTLE SMALL SQUARE MARK ON TOP BOTH GEAR SPROCKETS ON CAMSHAFTS TIMING MARKS SHOULD BE IN THE 12 OCLOCK POSITION BOTH CAMSHAFT TIMING MARKS SHOULD BE LINED UP WITH TIMING MARKS REAR OF TIMING MARKS ON TOP OF CAMSHAFT SPROCKET HOUSING. IF STILL HAVING TROUBLE WITH FINDING THE TIMING MARKS.YOU NEED A HAYNES REPAIR MANUAL.
Read full answer
Apr 12, 2011 • 1996 Toyota Camry
1helpful
1answer

How to set the time belt?
4 Cylinder diesel(4JX1) :
1 - Timing mark
2 - Cam pulley
3 - HP Oil pump pulley
4 - Tensioner pulley


suzman_0.jpg

6 Cylinder petrol:
Align crank(C) timing notch mark (1) to oil pump mark.
Align cam pulley(L+R) marks(3) to cylinder head marks
The cam belt has 3 marks, 2 lines and one mark that is actually a row of dots. Align the dots to the crank pulley groove mark(2) and align the other 2 lines to the cam pulley marks. Using a clothes peg to hold the belt to the cam pulleys works wonders to keep it in place while fitting. Please note the arrows on the belt and have them point in the direction of rotation - right to left side of engine
W - water pump pulley
I - Idler pulley
T - Tensioner pulley.

If for some reason you need to realign the cams on each bank :
Standing in front of the car and starting from YOUR left , looking at the cams you should see RE, RI, LI, LE on each of the camshafts.(R for right bank, L for left bank, I for intake and E for exhaust) Right bank camshafts are marked with one dot, left bank with 2 dots on the shaft itself. To align the camshafts to each other each cam shaft gear has a mark on it. Draw an imaginary line between the centre of the camshaft and the centre of the pulley. The alignment mark should be between the two along this imaginary line. The result will be that RI an RE will be at the top of each gear. The same with the left bank.


suzman_2.jpg
Read full answer
Nov 08, 2010 • 1998 Isuzu Rodeo
1helpful
1answer

2002 isuzu trooper want pull hat off your head timing belt marks are on mark. the motor will crank but do not have enough power to pull off. it is a 3.5 v-6 and computer code shows p1120 and p1334.
Aah I see. Let's start from the beginning then. Standing in front of the car and starting from YOUR left , looking at the cams you should see RE, RI, LI, LE on each of the camshafts.(R for right bank, L for left bank, I for intake and E for exhaust) Right bank camshafts are marked with one dot, left bank with 2 dots on the shaft itself. To align the camshafts to each other each cam shaft gear has a mark on it. Draw an imaginary line between the centre of the camshaft and the centre of the pulley. The alignment mark should be between the two along this imaginary line. The result will be that RI an RE will be at the top of each gear. The same with the left bank. Also read this: http://www.fixya.com/cars/t3609098-nned_know_set_cam_engine_timing
It explains setting the timing further. Get these set up correctly and then we can dig further. I can post a diagram but haven't figured out how on Fixya yet.
Read full answer
Dec 10, 2009 • 2002 Isuzu Trooper
3helpful
2answers

Need cam timing specs 22r toyota truck
there will be two highlighted or dotted chain links for the camshaft and one for the crankshaft gear, position cam dot/TDC indicator in the 12-O clock position, the two dotted links should be on ether side of cam dot, turn crank dot to the 6-O clock position and line up highlighted link with dot on crank gear, if timing cover is on, then make sure cylinder 1 is at TDC when the two links are at 12-O clock.
Read full answer
Apr 08, 2009 • 1983 Toyota Pickup
0helpful
1answer

Timing Marks-99 Ford Ranger
Its Dot to Dot.. Crank Pointer Up.. CAm Pointer down.. DOT 2 DOT.. Thank you
Read full answer
Mar 15, 2009 • 1999 Ford Ranger SuperCab
Not finding what you are looking for?

View Most Popular

1999 LX470

  • Cars & Trucks

Related Question

2001 Camry V6 1MZ-FE. Per the FSM, the alignment marks between the exhaust and intake cam gears should have two dots on the RH (rear) bank, and one dot on the LF (front) bank.

  • Cars & Trucks

64 views

Ask a Question

Usually answered in minutes!

Popular Questions

Lexus gx 470

Lexus LX 470 Cars & Trucks

How to get rid off VGRS light on on my lexus LX470?

2004 Lexus Lx 470

Just changed my battery and my vgrs light is now

2003 Lexus LX 470

How do I reset the VSC trac warning light on my

2005 Lexus Lx 470

My lx470 has the suspension

2000 Lexus LX470

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...