How to replace head gasket
Unscrew the rocker cover and remove the top casing, most cars now have gasket seal rather than a gasket so check this. Put new gasket in place and then replace top casing, replacing the bolts back in the order they should be in, then put rocker cover back on...
HYUNDAI MATRIX 1 6L 2003 G4ED F4AF3
SOURCE: How hard is it to replace a head gasket on an '04 Hyundai Elantra
depands on how mechanical your are . and you will need to send the head to a machine shop for plaining.you need tools and a torque wrench and the specs for tighten the head back down .it can be done with patience and on rare cases you can lift the head to replace the gasket without taking everything apart
SOURCE: blown head gasket
I would change both, as well as use new head bolts. Make sure your heads are not warped or cracked, especially the one that is leaking. There may not be any need to change the head if it is not cracked. These are prone to blowing a gasket especially after 150K miles or so. It will not cost a huge additional amount to change both head gaskets since the engine will have to be disassembled down to the heads anyway. Hope this helps you, Rick
SOURCE: 2004 jetta replaced head, head gasket, and timing belt replaced
crank position sensor maybe?
SOURCE: replace a head gasket for a 2002 intrepid
go to the parts store and get a chiltons or a haynes manual
1,032 views
Usually answered in minutes!
×