Where can i get a serpentine belt diagram for a 2007 Chrysler Sebring 2. 7 engine

Jeff, Check the attached links for your 2.4 belt routing,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Repair Guides Engine Mechanical Components Accessory Drive Belts 2...
How to Change Serpentine Belt on 2002 Chrysler Sebring
http://www.serpentinebeltdiagram.com/serpentine-belt-diagram-2001-chrysler-sebring-4-cylinder-24-liter-engine-alternator-and-air-conditioner-with-dohc-engine-02236

The short answer is no. You may be able to measure the length of a belt that does not go around the ac compressor and buy that belt, but chances are you won't be able to route the belt to bypass the compressor and keep it tight.

The answer is specific to the car itself. Does it have an Air Conditioner, etc.

Drive to a NAPA or other Auto Parts Store and inquire, they will be able to find the exact belt(s) you need.

If you can't find the diagram, you will need to draw out the routing direction of the old serpentine belt so that you can properly route the new serpentine belt around each pulley. or you can go to any auto parts store and they should be able to give you a diagram, or go to dealer to get a red out or diagram of your old belt. Good-Day!

The correct way to do this fix is with a compressor delete pulley,that way the belt is still routed properly and keeps the proper tension on the belt.All the major parts houses carry some type of compressor-delete kit,(the most popular p/n for 2.7 Chrysler engines is Part Number: 34177 Dorman part.)

Hi there:
Check in this previous LINK.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

The Sebring came with 3 engines. Siince you said you had a V-6 which one?
V-6 3.0? or 2.7?

http://serpentinebeltdiagrams.com/2006-chrysler-sebring-2-7l/

http://serpentinebeltdiagrams.com/wp-content/uploads/2010/08/sebring-2006-e1296371284561.jpg

The links above are for the 2.7.

Thanks for choosing FixYa,
Kelly

The belt diagram for a 2007 sebring sedan, this car can come with 3 size engines, the 2.4 or the 2.7 or the 3.5, here are diagrams of all the engines. ive labeled which diagram for the engine you use the correct one depending on your engine size, hope this helps.

Go to; daycoproducts.com, click cars and trucks, then go to serpentine belt. Then on the right side of the screen click on finding your vehicle. Then get the illistration number and click on illistrations, go to that number it should something 6-? or 7-?. It's a pretty good websight.

I need help on reinstalling a Serpentine Belt back onto a 2007 Chrysler sebring